Tanning Beds Parts

Tanning beds parts need to be routinely cleaned and repaired to ensure proper operation of the tanning bed. Some of the main tanning beds parts are described here.

Ultraviolet lamps or bulbs are the most important part of any tanning bed. Made out of quartz, these bulbs emit a safe amount of ultraviolet radiation, which results in a longer-lasting tan. Many choices of tanning bulbs are available; Wolff, Cosmedico VHR, VLR, and 9K9, and Voltrac are some among them. You can purchase the lamps from tanning bed dealers. Before purchasing, make sure that the make, model, and look of the bulb matches the bed currently in use. The life span of the lamp must also be verified. For example, the Wolf System Velocity sunlamps often last for 1000 hours.

Sometimes, UV radiations are emitted from the sides and back of the lamps. To prevent this, reflectors are used in tanning beds. Generally, they are made of highly polished aluminum and are shaped like a rounded "W". Acrylic shields are used to prevent heat burns from the UV lamps. They allow maximum amount of UV penetration. But the transmissive property of the shield will be lost with age. So, they need to be replaced at the right time. Acrylic shields can cost a few hundred dollars or more

The tanning beds also have internal cooling fans. These fans are installed to minimize the temperature of the tanning bed. Without them, the bed equipment gets overheated and is easily worn out. Most of the tanning beds use 4? axial fans, which operate on 110 volt or 220 volt. Some models use squirrel cage or carriage fans.

Another key component is the timer, which helps to limit the maximum time per tanning session. Each timer is set with a maximum exposure time that depends on the type of tanning equipment used. Typically, the time extends up to 20 minutes. Today, all tanning beds available in the U.S are equipped with timers. According to the FDA, all commercial tanning beds should have a timer with preset maximum time.

Tanning Beds provides detailed information on Tanning Beds, Tanning Bed Lotion, Home Tanning Beds, Commercial Tanning Beds and more. Tanning Beds is affiliated with Sunless Tanning Lotion.

Article Source: http://EzineArticles.com/?expert=Ken_Marlborough

Should I Lease A Tanning Bed?

You can lease a tanning bed or beds for your salon and it may be the best way to go. There are advantages when you lease a tanning bed or beds.

If you are the only owner of a tanning bed salon it may be best to lease the tanning bed or beds. Even if you are part of a partnership you may want to consider leasing a tanning bed or two.

When you lease a tanning bed or beds for your business you can have the best equipment for a decent price.

There are many companies that will lease a tanning bed or even several tanning beds. Check the reliability of these companies before you lease a tanning bed. Also compare prices and service when you are thinking about leasing a tanning bed.

When you lease a tanning bed instead of buying you will have more capital to work with. This can be beneficial to your business. Leasing a tanning bed will keep your line of credit open should you need it for other business expenses.

You may find a nice tax break when you lease a tanning bed rather than purchasing it. When you lease a tanning bed you will have a dollar for dollar write off on the lease rental payments.

If you are thinking about leasing a tanning bed or beds for your business you can contact the companies and ask for information concerning your monthly payments. These companies should be able to give you a lease quote over the phone.

Consider leasing a tanning bed or beds if you need this type of equipment for your business.

Timothy Gorman is a successful Webmaster and publisher of Tanning-Bed-Solutions.com. He provides more tanning bed information on tanning bed bulbs, tanning bed lotions and home tanning bed information that you can research in your pajamas on his website.

Article Source: http://EzineArticles.com/?expert=Tim_Gorman